Technical & Financial Calculation Engines
Archery Arrow Spine Calculator
A 50 lb recurve bow at a 28-inch draw needs a 600 spine arrow. Enter your draw weight, draw length, arrow length and point weight, and the calculator corrects the draw weight for your draw length, picks the spine bracket, checks the point weight and works out the FOC of your arrow.
- Spine is measured by ASTM F2031: a lower number is a stiffer arrow.
- Draw length changes real draw weight by about 2.5 lb per inch from 28 in.
- Hunting arrows fly best at 10–15% FOC.
- Arrows should be about 1 inch longer than the draw length.
- A spine chart is a starting bracket — confirm it by bareshaft or paper tuning.
Loading calculator…
Calculation Formula & Mathematical Engine
Theoretical equation governing this computation.
EffLb = DrawLb + (DrawLength - 28) \times 2.5, \quad FOC\% = \frac{BalancePoint - Length \div 2}{Length} \times 100Variable Definitions
Step-by-Step Calculation Example
Spine and FOC for a 50 lb Recurve at 28 Inches
- 1Draw length is 28 in, so the effective draw weight stays 50 lb
- 2The chart gives a 600 spine for up to 50 lb
- 3A 100-grain point is standard, so the bracket does not change
- 4Recommended arrow length is draw length + 1 in = 29 in
- 5FOC: (18.5 − 29 ÷ 2) ÷ 29 × 100 = 4 ÷ 29 × 100 = 13.8% — in the 10–15% hunting range
How to Pick the Right Arrow Spine
Follow these steps to get your result.
- 1Measure your draw length in inches and read the draw weight off your bow.
- 2Enter the draw weight, draw length, arrow length and point weight.
- 3Read the spine bracket and the recommended arrow length.
- 4Measure the balance point from the nock groove to check the FOC is 10–15%.
- 5Confirm the bracket with your arrow maker’s chart, then bareshaft or paper tune.
Comprehensive Practical Guide
In-depth analysis, domain guidelines, standard practices, and common pitfalls.
What Is Arrow Spine and Why Does It Matter?
Spine is how much an arrow bends when it leaves the bow. An arrow that is too stiff flies left for a right-handed archer; one that is too weak flies right and fishtails. Static spine is measured under a standard weight (ASTM F2031): a 600 spine bends 0.600 inches, a 400 spine bends 0.400 inches, so a lower number means a stiffer arrow.
How Does Draw Length Change the Spine I Need?
Draw weight is rated at a 28-inch draw. Every inch of draw length away from 28 adds or takes about 2.5 lb of real draw weight: a 50 lb bow at a 30-inch draw behaves like a 55 lb bow and needs a stiffer spine. This calculator applies that correction before it reads the chart.
What Is FOC and What Should It Be?
FOC (front of centre) is how far forward the arrow balances. Measure from the nock groove to the balance point, subtract half the arrow length, and divide by the full length. Hunting arrows fly best at 10–15% FOC; target arrows can be lower, around 7–10%. A heavier point raises FOC but weakens the dynamic spine, so change one thing at a time.
How Do I Confirm the Spine Is Right?
The chart gives a starting bracket, not a final answer. Confirm it by bareshaft tuning — shoot an arrow with no fletchings at 20 yards and see where it lands against fletched arrows — or by paper tuning through a sheet of paper. If bareshaft arrows land left of fletched arrows (right-handed), the spine is too stiff; if they land right, it is too weak.
Frequently Asked Questions About Archery Arrow Spine Calculator
Direct, verified answers to common calculation and methodology questions.
Related Calculators
Explore complementary tools and related mathematical engines.
Bicycle Gear Ratio Calculator
Work out gear ratio, gear inches, development and speed at any cadence, with wheel presets for 700c, 26, 27.5 and 29 inch wheels.
Drone Flight Time Calculator
Work out drone flight time, range and safe out-and-back distance from battery size, weight, payload, wind and flying style, with DJI presets.
Silica Tire Pressure Calculator
Calculate optimal cycling tire pressure (Silca model) and automotive silica-compound tire temperature adjustments.