Garden & OutdoorLast reviewed: November 2026

Deck Board Calculator

A deck board calculator works out how many decking boards, how much linear footage and roughly how many screws a deck needs. Enter the deck size, board width and length, and joist spacing, and it counts full rows across the width plus 10% cutting waste for composite or pressure-treated boards.

Key facts:
  • A 20 by 14 ft deck needs about 42 sixteen-foot boards.
  • Standard 5/4 by 6 decking is 5.5 inches wide.
  • Leave a 3/16 to 1/4-inch gap between boards.
  • Most composite decking needs 12-inch joist spacing.

Loading calculator…

Share or Export Current Results

Share Deck Board Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Boards = \left\lceil \frac{Length_{ft} \times \lceil Width_{ft} / ((W_{b} + Gap)/12) \rceil}{BoardL_{ft}} \right\rceil \times 1.10

Variable Definitions

BoardsTotal stock boards to purchase including 10% cutting and trimming waste
W_{b}Actual board width: 5.5 inches for standard 5/4x6 decking
GapThermal and drainage gap (standard 3/16" to 1/4")

Step-by-Step Calculation Example

Decking a 20ft × 14ft Backyard Deck with 16ft Boards

Scenario: Installing 5.5" wide composite decking with 1/4" spacing.
Deck Dimensions20 ft × 14 ft (280 sq ft)
Stock Board Length16 ft
Board Width5.5 inches
Gap0.25 inch
Execution Steps
  1. 1Effective row coverage: (5.5 + 0.25) ÷ 12 = 0.479 ft per board row
  2. 2Total rows across 14ft width: 14 ÷ 0.479 = 30 rows
  3. 3Total linear feet: 30 rows × 20 ft = 600 linear ft
  4. 4Boards needed: (600 ÷ 16) × 1.10 waste = 42 boards (16ft length)
Final Verified Output:42 Boards of 16-Ft Length + ~980 Deck Fastener Screws

How to Estimate Decking for a Deck

Follow these steps to get your result.

  1. 1Measure the deck length and width in feet.
  2. 2Choose your board length and width, the gap, and the joist spacing.
  3. 3Enter the dimensions to get the board count, linear footage and screw estimate.
  4. 4Add 10% extra boards for cutting waste and bad stock.
  5. 5Order the boards and fasteners, and stagger butt joints over different joists when laying.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Joist Spacing: 12 Inches vs. 16 Inches on Center

Natural pressure-treated lumber can span 16 inches on center. Most composite decking manufacturers require 12-inch joist spacing for diagonal patterns or commercial stiffness.

What Gap Should You Leave Between Deck Boards?

Leave a 3/16 to 1/4-inch gap between boards so rain drains through and boards can expand in summer heat. Hidden fastener systems set the gap for you, while face-screwed boards need a spacer or a consistent screw pattern to keep the gap even.

Frequently Asked Questions About Deck Board Calculator

Direct, verified answers to common calculation and methodology questions.

Gaps allow rainwater and snowmelt to drain freely and accommodate summer thermal expansion.
Authoritative Sources & Data References:
  • North American Deck and Railing Association (NADRA)
  • IRC Section R507 Exterior Decks

Disclaimer: Comply with manufacturer fastener warranty instructions.