Construction & Home ImprovementLast reviewed: November 2026

Drywall & Paint Coverage Calculator

A 12 × 10 ft room with an 8 ft ceiling needs 17 drywall sheets and 3 gallons of paint for two coats. Enter your room size, ceiling height and openings, and the calculator sizes 4 × 8 or 4 × 12 sheets, works out mud, tape, screws and primer, and totals the materials cost.

Key facts:
  • A 4 × 8 ft drywall sheet covers 32 sq ft; a 4 × 12 ft sheet covers 48 sq ft.
  • One gallon of paint covers about 350 sq ft per coat on smooth drywall.
  • New drywall must be primed before painting, or the finish will look patchy.
  • Doors and windows are deducted, so measure every opening before ordering.

Loading calculator…

Share or Export Current Results

Share Drywall & Paint Coverage Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Sheets = \left\lceil \frac{Area_{gross}}{32} \times 1.10 \right\rceil, \quad Paint = \left\lceil \frac{Area_{net} \times Coats}{350} \right\rceil

Variable Definitions

Area_{gross}Wall area plus ceiling, before openings are deducted — sheets are cut around openings, so the cut-outs become waste
Area_{net}Wall area plus ceiling (if included) minus door and window openings, in square feet — the area paint and primer must cover
Sheets4 × 8 ft drywall sheets (32 sq ft each), including 10% cutting waste
PaintGallons of paint, rounded up to whole gallons
CoatsNumber of paint coats, usually 2 on new drywall

Step-by-Step Calculation Example

Drywall and Paint for a 12 × 10 Ft Room With an 8 Ft Ceiling

Scenario: A homeowner is drywalling and painting one room, including the ceiling, with one 3 × 7 ft door and one 3 × 5 ft window, using 4 × 8 ft sheets and two coats of paint.
Room Size12 ft × 10 ft, 8 ft ceiling
Openings1 door 3 × 7 ft, 1 window 3 × 5 ft
Sheet Size4 × 8 ft (32 sq ft)
Paint Coats2 coats, plus 1 coat primer
Execution Steps
  1. 1Wall area: 2 × (12 + 10) × 8 = 352 sq ft
  2. 2Ceiling: 12 × 10 = 120 sq ft; openings: door 3 × 7 = 21 + window 3 × 5 = 15 → 36 sq ft
  3. 3Net area: 352 + 120 - 36 = 436 sq ft
  4. 4Sheets: 472 ÷ 32 = 14.75 → × 1.10 waste = 16.23 → 17 sheets (4 × 8). Openings are not deducted for sheets: the cut-outs become waste.
  5. 5Mud: 436 ÷ 100 = 4.36 gal → one 4.5-gal bucket; tape: one 250-ft roll; screws: 17 × 28 = 476 → one 500-count box
  6. 6Paint: 436 × 2 coats ÷ 350 = 2.49 → 3 gal; primer: 436 ÷ 350 = 1.25 → 2 gal
  7. 7Cost: 17 × $14 + 3 × $45 + 2 × $30 + $18 mud + $8 tape + $12 screws = $471
Final Verified Output:17 Drywall Sheets (4×8) | 3 Gal Paint | 2 Gal Primer | $471 Materials

How to Measure a Room for Drywall and Paint

Follow these steps to get your result.

  1. 1Measure the length and width of the room and the ceiling height in feet.
  2. 2Measure every door and window opening and note its width and height.
  3. 3Decide whether the ceiling needs drywall and paint, and pick 4 × 8 or 4 × 12 sheets.
  4. 4Enter the measurements and the number of paint coats to get the full materials list.
  5. 5Buy the listed sheets, mud, tape, screws, primer and paint, plus 10% spare for cuts.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

How Many Drywall Sheets Do I Need for a Room?

Measure the wall perimeter times the ceiling height, add the ceiling if you are covering it, and subtract every door and window opening. Divide the net square footage by 32 for 4 × 8 sheets (or 48 for 4 × 12 sheets) and add 10% for cutting waste, then round up to whole sheets.

How Much Paint Do I Need Per Coat?

One gallon of paint covers about 350 sq ft per coat on smooth drywall. Multiply the net wall and ceiling area by the number of coats, divide by 350, and round up to whole gallons. New drywall drinks paint, so budget for two coats plus one coat of primer, and allow 300 sq ft per gallon on textured surfaces.

Should I Include the Ceiling in the Drywall and Paint?

Include the ceiling if it is new drywall or needs repainting: in the worked example it adds 120 sq ft, which is nearly 4 extra sheets and a full gallon of paint. Use flat ceiling paint, which hides seams and roller marks better than the eggshell or satin used on walls.

Drywall Screws, Tape and Mud: What Else to Buy

Allow 28 screws per 4 × 8 sheet on studs 16 in apart, one 250-ft roll of joint tape per 500 sq ft, and about 1 gallon of joint compound per 100 sq ft of finished surface. Buy screws by the 500-count box: a 17-sheet room needs 476 screws, so one box covers it with spares.

Frequently Asked Questions About Drywall & Paint Coverage Calculator

Direct, verified answers to common calculation and methodology questions.

Walls are 2 × (12 + 12) × 8 = 384 sq ft, plus a 144 sq ft ceiling = 528 sq ft gross. That is 528 ÷ 32 = 16.5 sheets, times 1.10 waste = 18.15, so buy 19 sheets of 4 × 8. Openings are not deducted for sheets: the cut-outs become waste.
Authoritative Sources & Data References:
  • USG Sheetrock — Gypsum Panel Installation Guide
  • Sherwin-Williams — Paint Coverage Rates
  • Gypsum Association GA-216 — Application and Finishing of Gypsum Panel Products

Disclaimer: Coverage rates vary by product and surface; check the label on the paint and drywall you buy, and confirm prices with your supplier.