Mathematics & General CalculationsLast reviewed: November 2026

Feet and Inches Calculator

The Feet and Inches Calculator is an essential tool for carpenters, builders, architects, woodworkers, and DIY enthusiasts. It handles mixed architectural dimensions, adding, subtracting, multiplying, and dividing feet, inches, and fractional tape-measure values (1/2, 1/4, 1/8, 1/16, 1/32, 1/64) with automatic GCD reduction and metric conversion.

Key facts:
  • There are exactly 12 inches in one foot.
  • Tape measures read to 1/16 inch; this calculator goes to 1/64 inch.
  • The worked example adds boards to 14 ft 4 5/8 in (172.625 in).
  • Fractions are reduced automatically using the greatest common divisor.

Loading calculator…

Share or Export Current Results

Share Feet and Inches Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

\text{Total Inches} = (\text{Feet} \times 12) + \text{Inches} + \frac{\text{Numerator}}{\text{Denominator}}

Variable Definitions

FeetWhole feet measurement (1 ft = 12 inches)
InchesWhole inches measurement (0 to 11)
FractionsFractional tape measure division (reduced by Greatest Common Divisor)

Step-by-Step Calculation Example

Adding Framing Board Dimensions

Scenario: A builder needs to combine two lumber cuts: Measurement 1 is 8 feet 9 3/4 inches; Measurement 2 is 5 feet 6 7/8 inches.
Measurement 18' 9 3/4"
Measurement 25' 6 7/8"
OperationAddition (+)
Execution Steps
  1. 1Convert fractions to common denominator 8: 3/4 = 6/8
  2. 2Add fractional inches: 6/8 + 7/8 = 13/8 = 1 5/8 inches
  3. 3Add whole inches: 9 + 6 + 1 (from fraction) = 16 inches
  4. 4Convert excess inches to feet: 16 inches = 1 foot 4 inches
  5. 5Add whole feet: 8 + 5 + 1 (from inches) = 14 feet
  6. 6Assemble final measurement: 14 feet 4 5/8 inches
Final Verified Output:14' 4 5/8" (172.625 inches | 4.385 meters)

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Working with Common Fractional Tape Measure Intervals

Standard tape measures are graduated into 1/16th inch intervals, with precision engineering tapes reaching 1/32nd or 1/64th. The key to accurate carpentry math is finding the least common denominator (LCD) before performing arithmetic, then simplifying fractions using the Greatest Common Divisor (GCD).

Converting Mixed Fractions to Decimals and Metric Units

To convert to decimal feet: Feet + (Inches / 12) + (Fraction / 12). To convert to millimeters, multiply total decimal inches by exactly 25.4 (since 1 inch = 25.4 mm by international treaty).

Frequently Asked Questions About Feet and Inches Calculator

Direct, verified answers to common calculation and methodology questions.

Convert all fractions to a common denominator, sum the fractions and carry any whole inches (16/16 = 1 inch), sum the inches and carry any whole feet (12 inches = 1 foot), and sum the feet.
Authoritative Sources & Data References:
  • National Institute of Standards and Technology (NIST) Handbook 44
  • International Organization for Standardization (ISO 80000-3)

Disclaimer: Remember to account for saw blade kerf thickness (typically 1/8") when cutting lumber.