EducationLast reviewed: November 2026

GPA Calculator

Four courses — A (3 credits), B+ (4), A− (3) and C (3) — give a 3.25 GPA on the 4.0 scale. Enter each course grade and its credits, pick the 4.0, 4.3 or 5.0 scale, and the calculator works out the semester GPA, the quality points and the cumulative GPA with any previous credits.

Key facts:
  • GPA = total quality points ÷ total credits.
  • On the 4.0 scale, A is 4.0, B is 3.0, C is 2.0, D is 1.0 and F is 0.
  • A+ is 4.0 on the 4.0 scale but 4.3 on the 4.3 scale.
  • Weighted GPAs add points for AP, IB and Honors courses and can pass 4.0.
  • Pass/fail courses do not count toward GPA.

How this tool differs: This is the general GPA calculator: one entry, all three scales, semester and cumulative GPA. The other GPA pages are narrower — middle school, multi-semester high school planning, a final-exam solver, no-credits transcripts and multi-semester CGPA.

Loading calculator…

Share or Export Current Results

Share GPA Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

GPA = \frac{\sum (GradePoints \times Credits)}{\sum Credits}, \quad Cumulative = \frac{PrevGPA \times PrevCredits + QualityPoints}{PrevCredits + Credits}

Variable Definitions

GradePointsPoints for the letter grade on the chosen scale (A = 4.0, B = 3.0, C = 2.0, D = 1.0, F = 0 on the 4.0 scale)
QualityPointsGrade points × credits for each course, added up across all courses
CreditsCredit hours for each course — heavier courses count more
PrevGPAYour GPA from earlier terms, combined with its credits for the cumulative figure

Step-by-Step Calculation Example

GPA for Four Courses on the 4.0 Scale

Scenario: A student takes four courses in one semester: A in a 3-credit course, B+ in a 4-credit course, A− in a 3-credit course and C in a 3-credit course.
CoursesA (3 cr), B+ (4 cr), A− (3 cr), C (3 cr)
Scale4.0
Execution Steps
  1. 1Grade points: A = 4.0, B+ = 3.3, A− = 3.7, C = 2.0
  2. 2Quality points: (4.0 × 3) + (3.3 × 4) + (3.7 × 3) + (2.0 × 3) = 12 + 13.2 + 11.1 + 6 = 42.3
  3. 3Total credits: 3 + 4 + 3 + 3 = 13
  4. 4GPA: 42.3 ÷ 13 = 3.25
Final Verified Output:3.25 GPA (4.0 Scale) | 42.3 Quality Points | 13 Credits

How to calculate your GPA

Follow these steps to get your result.

  1. 1Pick the grade scale your school uses: 4.0, 4.3 or 5.0.
  2. 2Enter each course’s letter grade and its credit hours.
  3. 3Read the semester GPA, the quality points and the total credits.
  4. 4Add a previous GPA and credit total to see the cumulative GPA.
  5. 5Check the result against your school’s scale — weighted scales vary by school.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

How Is GPA Calculated?

Convert each letter grade to grade points, multiply by the course credits to get quality points, add up all the quality points and divide by the total credits. Credits are the weights: a 4-credit B+ counts more than a 3-credit A. In the worked example, 42.3 quality points divided by 13 credits gives a 3.25 GPA. If every course carries the same credits, the GPA is just the plain average of the grade points.

What Is the Difference Between the 4.0, 4.3 and 5.0 Scales?

The 4.0 scale is the standard: A and A+ both count as 4.0, B is 3.0, C is 2.0, D is 1.0 and F is 0. The 4.3 scale is the same except A+ counts as 4.3, so a student with A+ grades can pass 4.0. The 5.0 scale is a weighted scale: A counts as 5.0, B as 4.0 and C as 3.0, because it adds a point for honours, AP or IB courses. Weighted scales vary by school, so always check your school’s own scale before you report a weighted GPA.

How Do I Raise My GPA?

Work out the quality points you need: target GPA × total credits after the next term, minus the quality points you already have. For example, with 42.3 quality points from 13 credits and 15 more credits next term, a 3.5 target needs 3.5 × 28 = 98 quality points in total, so the next term must earn 98 − 42.3 = 55.7 points — an average of 3.71 per credit, or mostly A− grades. Early terms matter most: the same grades move a small-credit GPA far more than a large-credit one.

Frequently Asked Questions About GPA Calculator

Direct, verified answers to common calculation and methodology questions.

A 3.0 is solid, 3.5 is strong and 3.7 or above is competitive for selective colleges. What counts as good depends on the school — a 3.5 at a hard-grading school can beat a 3.8 elsewhere.
Authoritative Sources & Data References:
  • College Board — GPA Guidelines
  • National Center for Education Statistics (NCES) — Transcript Studies
  • Method: quality points = grade points × credits; GPA = total quality points ÷ total credits; grade-point tables follow the standard US 4.0 / 4.3 / 5.0 scales.

Disclaimer: Grade-point tables vary by school and country. This calculator uses the standard US scales; check your school’s own scale before reporting a GPA.