Construction & Home ImprovementLast reviewed: November 2026

Roof Pitch & Angle Converter

A 6/12 roof pitch is 26.57 degrees, a 50% slope, and a 1.118 multiplier. Enter a pitch in any of the four formats and the calculator converts it to the other three, then works out rafter length, roof area and the number of roofing squares.

Key facts:
  • A 6/12 pitch rises 6 in for every 12 in of horizontal run.
  • Pitch converts to degrees with arctangent: a 6/12 pitch is 26.57 degrees.
  • Multiply the footprint area by the pitch multiplier (1.118 for 6/12) to get true roof area.
  • One roofing square covers 100 sq ft of roof area.

Loading calculator…

Share or Export Current Results

Share Roof Pitch & Angle Converter directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Angle = \arctan\left(\frac{Rise}{Run}\right), \quad Slope\% = \frac{Rise}{Run} \times 100, \quad Multiplier = \sqrt{1 + \left(\frac{Rise}{Run}\right)^2}

Variable Definitions

RiseVertical rise of the roof over the run, in inches or feet
RunHorizontal run of the roof, in the same units as the rise
AngleRoof angle in degrees above horizontal
MultiplierFactor to convert footprint area to true roof area

Step-by-Step Calculation Example

Converting a 6/12 Pitch on a 30 × 40 Ft Gable Roof

Scenario: A roofer is pricing a gable roof on a 30 × 40 ft footprint with a 6/12 pitch, ridge running along the 40-ft side.
Roof Pitch6/12
Footprint30 ft × 40 ft
Roof TypeGable (two slopes)
Execution Steps
  1. 1Pitch ratio: 6 ÷ 12 = 0.5
  2. 2Angle: arctan(0.5) = 26.57°
  3. 3Slope: 0.5 × 100 = 50%
  4. 4Multiplier: √(1 + 0.5²) = √1.25 = 1.118
  5. 5Run per slope: 30 ÷ 2 = 15 ft; rise: 15 × 0.5 = 7.5 ft; rafter: √(15² + 7.5²) = 16.77 ft
  6. 6Roof area: 2 × 16.77 × 40 = 1,341.6 sq ft = 13.42 squares → order 14
Final Verified Output:6/12 Pitch | 26.57° | 50% Slope | 1.118 Multiplier | 13.42 Squares

How to Measure Roof Pitch on an Existing Roof

Follow these steps to get your result.

  1. 1Place a 24-inch level against the underside of a rafter in the attic, or on the roof surface.
  2. 2Mark 12 inches along the level from the point where it touches the rafter.
  3. 3Measure straight down from the 12-inch mark to the rafter or roof surface.
  4. 4That measurement in inches is the rise: a 6-inch rise over 12 inches is a 6/12 pitch.
  5. 5Enter the pitch to convert it to degrees, percent slope, rafter length and roof area.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

What Is Roof Pitch and How Is It Written?

Roof pitch is written as rise over a 12-inch run: a 6/12 pitch rises 6 inches for every 12 inches of horizontal run. It is the standard way roofers, architects and building codes describe roof steepness in North America.

How Do I Convert Roof Pitch to Degrees?

Take the arctangent of rise over run. A 4/12 pitch is 18.43°, a 6/12 pitch is 26.57°, an 8/12 pitch is 33.69°, and a 12/12 pitch is exactly 45°. Enter any one format and the calculator converts it to the other three.

What Is the Roof Pitch Multiplier Used For?

The multiplier converts the flat footprint area into the true sloped roof area: multiply the footprint by the multiplier. For a 6/12 pitch the multiplier is 1.118, so a 1,200 sq ft footprint is really 1,342 sq ft of roof. Roofers use it to price shingles, underlayment and labour.

How Many Roofing Squares Is My Roof?

One roofing square covers 100 sq ft. Divide the total roof area by 100 and round up: the worked example is 13.42 squares, so order 14, then add 10% waste for hips, valleys and cutting. Complex roofs with many valleys need more waste than a simple gable.

Frequently Asked Questions About Roof Pitch & Angle Converter

Direct, verified answers to common calculation and methodology questions.

A 4/12 pitch is 18.43 degrees. Take the arctangent of 4 divided by 12 to convert any x/12 pitch to degrees.
Authoritative Sources & Data References:
  • International Residential Code (IRC Section R905 — Roof Assemblies)
  • National Roofing Contractors Association (NRCA) Roofing Manual

Disclaimer: Do not climb on a steep or wet roof to measure pitch; measure from the attic or use the building plans.