Mathematics & GeneralLast reviewed: November 2026

Coffee to Water Ratio Calculator

A pour-over brew with 30 g of coffee needs 480 ml of water at a 1:16 ratio. Pick your brew method — pour over, espresso, French press, drip, AeroPress, Chemex, cold brew or moka — enter the coffee weight, and the calculator works out the water and the strength, with the grind, temperature and brew time for that method.

Key facts:
  • Pour over, drip and Chemex all start at a 1:16 coffee-to-water ratio.
  • Espresso uses a 1:2 dose-to-yield ratio: 18 g in, about 36 g out.
  • One tablespoon of ground coffee weighs about 10 g.
  • Cold brew uses a 1:8 ratio and 12–16 hours of steeping.
  • Best water temperature for hot brewing is 93–94°C.

Loading calculator…

Share or Export Current Results

Share Coffee to Water Ratio Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Water_{ml} = Coffee_{g} \times Ratio, \quad Tbsp \approx \frac{Coffee_{g}}{10}, \quad Cups = \frac{Water_{ml}}{240}

Variable Definitions

Coffee_{g}Coffee dose in grams — weighed on a scale, not scooped
RatioParts of water per 1 part of coffee (for example 16 for pour over, 2 for espresso)
Water_{ml}Water needed in millilitres (1 ml of water weighs 1 g)
TbspTablespoons of ground coffee, at about 10 g per tablespoon
CupsBrewed coffee in 240 ml cups

Step-by-Step Calculation Example

Pour-Over Coffee: 30 g of Coffee at a 1:16 Ratio

Scenario: A home brewer makes one large pour-over mug with 30 g of medium-ground coffee and wants the right amount of water.
Brew MethodPour over (1:16)
Coffee30 g
Grind / TemperatureMedium, 93°C
Execution Steps
  1. 1Water: 30 g × 16 = 480 ml (480 g of water)
  2. 2Spoons: 30 ÷ 10 = 3 tablespoons of ground coffee
  3. 3Cups: 480 ÷ 240 = 2 cups of brewed coffee
  4. 4Strength: a 1:16 ratio is balanced — not weak, not bitter
  5. 5Brew: medium grind, water at 93°C, pour slowly over 3–4 minutes
Final Verified Output:480 ml Water | 3 Tbsp Coffee | 2 Cups | Balanced

How to Brew Coffee With the Right Ratio

Follow these steps to get your result.

  1. 1Pick your brew method: pour over, espresso, French press, drip, AeroPress, Chemex, cold brew or moka.
  2. 2Weigh your coffee on a scale in grams.
  3. 3Enter the coffee weight and the ratio to get the water in millilitres.
  4. 4Grind to the size shown for your method and heat the water to the shown temperature.
  5. 5Brew for the shown time, then taste and adjust the ratio — not the grind — next time.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

What Is a Good Coffee to Water Ratio?

Start at 1:16 for pour over, drip and Chemex — 1 g of coffee to 16 g of water. French press is a little stronger at 1:14, AeroPress at 1:13, and cold brew at 1:8 because cold water extracts slowly. Espresso is a different job: a 1:2 dose-to-yield ratio, so 18 g of coffee makes about 36 g of espresso in the cup.

Should I Measure Coffee by Weight or by Spoons?

Weigh it. A tablespoon of ground coffee weighs about 10 g, but the real number moves with the bean and the grind — light roasts are denser than dark roasts. A 30 g dose is 3 tablespoons only as a rough guide; a cheap kitchen scale gives the same cup every morning.

How Do I Make My Coffee Stronger or Weaker?

Change the ratio, not the grind. For a stronger cup, use less water per gram of coffee — try 1:14 instead of 1:16. For a weaker cup, go to 1:17 or 1:18. If the coffee tastes bitter and dry, the grind is too fine or the water too hot; if it tastes sour and thin, the grind is too coarse or the brew too short.

How Much Coffee Do I Need for a French Press or Cold Brew?

A 1-litre French press at 1:14 needs about 70 g of coffee (1000 ÷ 14 = 71 g) and 4 minutes of steeping with a coarse grind. Cold brew at 1:8 needs 125 g of coffee per litre of water and 12–16 hours in the fridge — the result is a concentrate, so dilute it 1:1 with water or milk when you serve it.

Frequently Asked Questions About Coffee to Water Ratio Calculator

Direct, verified answers to common calculation and methodology questions.

Use 1:16 — 1 g of coffee to 16 g (ml) of water. For 30 g of coffee that is 480 ml of water, which makes 2 cups. If the cup tastes weak, try 1:15; if it tastes bitter, try 1:17.
Authoritative Sources & Data References:
  • Specialty Coffee Association — Golden Cup Standard
  • Barista Hustle — Coffee Brewing Ratios

Disclaimer: Ratios are starting points; taste and adjust to your beans and your cup. Spoon weights are estimates — use a scale for repeatable results.