Construction & Home ImprovementLast reviewed: November 2026

Sand Calculator

A sand calculator converts the size of your project into cubic yards, tons and 50-lb bags of sand. Choose coarse concrete sand, fine mason sand or play sand, enter length, width and depth, and it works out how much to order for bedding, mortar, a sandbox or a paver base.

Key facts:
  • Dry sand weighs about 2,600 to 2,700 lb per cubic yard.
  • One cubic yard is about 54 bags of 50-lb sand.
  • Use coarse ASTM C33 sand for paver bedding — never play sand.
  • One cubic yard covers 324 sq ft at 1 inch deep.

Loading calculator…

Share or Export Current Results

Share Sand Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Tons = \frac{L_{ft} \times W_{ft} \times (D_{in}/12)}{27} \times 1.35

Variable Definitions

TonsTotal weight of sand (1.35 tons/yd³ for moist concrete sand)
L, W, DLength (ft), Width (ft), Depth (inches)

Step-by-Step Calculation Example

Calculating Sand for a 20ft × 15ft Sandbox at 2" Depth

Scenario: Filling an excavation area with clean washed sand.
Length20 ft
Width15 ft
Depth2 inches
Execution Steps
  1. 1Cubic feet: 20 × 15 × (2/12) = 50 cu ft
  2. 2Cubic yards: 50 ÷ 27 = 1.85 cu yds
  3. 3Tonnage: 1.85 × 1.35 = 2.50 tons (or 100 bags of 50 lbs)
Final Verified Output:2.5 Tons (1.85 Cubic Yards) Sand

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Types of Sand: Concrete vs. Mason vs. Play Sand

Concrete sand (ASTM C33) is coarse and angular for bedding and concrete mixing. Mason sand is finely sifted for mortar. Play sand is washed and rounded for safety in sandboxes.

How Much Sand Do I Need for a Paver Bedding Layer?

Paver bedding is a 1-inch layer of coarse concrete sand, screeded level over the compacted base. One cubic yard covers about 324 sq ft at that depth, so a 300 sq ft patio needs roughly 0.93 cubic yards — about 1.3 tons. Never use play sand or mason sand for bedding: their fine, rounded grains hold water and shift under load.

Frequently Asked Questions About Sand Calculator

Direct, verified answers to common calculation and methodology questions.

Dry loose sand weighs roughly 2,600 to 2,700 lbs (1.3 to 1.35 tons).
Authoritative Sources & Data References:
  • ASTM C144 Standard Specification for Aggregate for Masonry Mortar

Disclaimer: Moisture content expands sand volume (bulking effect).