Construction & Home ImprovementLast reviewed: November 2026

Gravel Calculator

A gravel calculator turns the length, width and depth of your project into cubic yards and tons of stone to order. Pick your material — crushed stone, pea gravel or crusher run — and it applies the right density and a 10% compaction allowance, so you order enough without paying for a truckload you do not need.

Key facts:
  • One cubic yard is 27 cubic feet.
  • Crushed stone weighs about 1.4 tons per cubic yard; pea gravel about 1.3.
  • One ton covers roughly 100 sq ft at 2 inches deep.
  • Allow 10% extra for compaction and settling.

Loading calculator…

Share or Export Current Results

Share Gravel Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Tons = \frac{Length_{ft} \times Width_{ft} \times (Depth_{in}/12)}{27} \times Density_{tons/yd^3} \times 1.10

Variable Definitions

TonsTotal aggregate weight to order from quarry or landscape supply
DensityMaterial weight: ~1.40 tons/yd³ for crushed stone, ~1.30 tons/yd³ for pea gravel
1.10Standard 10% compaction and ground settlement allowance

Step-by-Step Calculation Example

Calculating Gravel for a 25ft × 10ft Patio Base

Scenario: Installing crushed stone gravel at 3 inches depth with 1.4 tons/yd³ density.
Length25 ft
Width10 ft
Depth3 inches
Density1.40 tons/cu yd
Execution Steps
  1. 1Volume in cubic feet: 25 × 10 × (3/12) = 62.5 cu ft
  2. 2Volume in cubic yards: (62.5 × 1.10) ÷ 27 = 2.55 cu yds
  3. 3Weight in tons: 2.55 × 1.40 = 3.57 tons
Final Verified Output:3.6 Tons (2.55 Cubic Yards) Crushed Gravel

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Crushed Stone vs. Rounded Gravel

Angular crushed stone locks together under compaction, making it ideal for driveways, bases, and walkways. Rounded pea gravel shifts underfoot and is preferred for dog runs, pipe bedding, and decorative borders.

How Deep Should Gravel Be?

Use 2 inches for decorative cover, 3 to 4 inches for walkways and patio bases, and 4 inches or more for driveways, where the stone carries vehicle weight. One ton covers about 100 sq ft at 2 inches, 65 to 70 sq ft at 3 inches, and about 50 sq ft at 4 inches — so depth is the biggest driver of how much you order.

Frequently Asked Questions About Gravel Calculator

Direct, verified answers to common calculation and methodology questions.

At 2 inches depth, one ton covers approximately 100 sq ft; at 3 inches, ~65-70 sq ft; at 4 inches, ~50 sq ft.
Authoritative Sources & Data References:
  • National Stone, Sand & Gravel Association (NSSGA)
  • US Army Corps of Engineers Aggregate Handbook

Disclaimer: Moisture content at quarry loading scales affects actual scale weights.