Construction & Home ImprovementLast reviewed: November 2026

Tile & Flooring Waste Calculator

A 12 × 10 ft room needs 69 tiles at 12 × 24 in with a diagonal layout. Enter your floor size and tile size, pick a pattern, and the calculator adds the right waste allowance, rounds up to whole boxes, and works out grout and underlayment.

Key facts:
  • Straight layouts need 10% waste, diagonal 15%, and herringbone 20%.
  • A 12 × 24 in tile covers 2 sq ft, so a 120 sq ft room needs 60 tiles before waste.
  • Always round up to whole boxes and keep at least one spare box for repairs.
  • The same area-times-waste maths works for LVP and laminate flooring.

Loading calculator…

Share or Export Current Results

Share Tile & Flooring Waste Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Tiles = \left\lceil \frac{Area_{ft^2} \times (1 + Waste)}{TileArea_{ft^2}} \right\rceil, \quad Boxes = \left\lceil \frac{Tiles}{PerBox} \right\rceil

Variable Definitions

Area_{ft^2}Floor area to tile, in square feet
WastePattern waste allowance: straight 10%, diagonal 15%, herringbone 20%
TileArea_{ft^2}Area of one tile (for example 12 × 24 in = 2 sq ft)
PerBoxNumber of tiles supplied in one box

Step-by-Step Calculation Example

Tiles for a 12 × 10 Ft Room With 12 × 24 In Tiles, Diagonal Layout

Scenario: A homeowner is tiling a 120 sq ft room with 12 × 24 in tiles in a diagonal pattern, sold 10 tiles per box, with a 25-lb bag of grout covering 125 sq ft.
Floor Area12 ft × 10 ft (120 sq ft)
Tile Size12 × 24 in (2 sq ft each)
PatternDiagonal (15% waste)
Tiles Per Box10
Execution Steps
  1. 1Floor area: 12 × 10 = 120 sq ft
  2. 2Diagonal waste 15%: 120 × 1.15 = 138 sq ft
  3. 3Tiles: 138 ÷ 2 sq ft per tile = 69 tiles
  4. 4Boxes: 69 ÷ 10 = 6.9 → 7 boxes (70 tiles)
  5. 5Grout: 120 sq ft × 0.2 kg per sq ft at a 3 mm joint = 24 kg
  6. 6Underlayment: 120 × 1.05 = 126 sq ft
Final Verified Output:69 Tiles | 7 Boxes (12×24 in) | ~24 kg Grout | 126 Sq Ft Underlayment

How to work out tile waste and boxes

Follow these steps to get your result.

  1. 1Measure the floor length and width in feet.
  2. 2Enter the tile size and pick the laying pattern.
  3. 3Read the waste allowance for that pattern — diagonal needs more than straight.
  4. 4Read the tile count rounded up to whole boxes.
  5. 5Add grout and underlayment from the results before you order.

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

How Much Tile Waste Should I Add for Each Pattern?

Add 10% waste for a straight grid layout, 15% for diagonal, and 20% for herringbone. Diagonal tiles are cut at an angle along every wall, and herringbone cuts at both ends of almost every piece, so the offcuts pile up fastest. Rooms with many corners, niches or angled walls need the higher end of the range.

How Do I Work Out Tiles Per Box?

Divide the tile area into the floor area with waste included, then divide by the number of tiles per box and round up to a whole box. In the worked example 69 tiles at 10 per box is 6.9 boxes, so you buy 7. Keep at least one spare box for future repairs: dye lots change, and a matching tile may not exist in a year.

Does the Same Waste Maths Work for LVP and Laminate?

Yes. Luxury vinyl plank and laminate use the same area-times-waste formula; only the piece size and pieces per box change. Use the same presets — 10% straight, 15% diagonal, 20% herringbone — and the calculator works out planks, boxes and underlayment the same way it works out tiles.

How Much Grout and Underlayment Do I Need?

Grout runs about 0.2 kg per sq ft at a 3 mm joint — about 24 kg for a 120 sq ft floor — and wider joints or smaller tiles use more grout because there is more joint per square foot. Underlayment is the floor area plus 5% for cuts: 126 sq ft for the worked example.

Frequently Asked Questions About Tile & Flooring Waste Calculator

Direct, verified answers to common calculation and methodology questions.

Add 15% for a diagonal layout. The angled cuts along every wall waste more tile than a straight grid, which needs only 10%.
Authoritative Sources & Data References:
  • Tile Council of North America (TCNA) Handbook for Ceramic, Glass, and Stone Tile Installation
  • Manufacturer coverage rates (Daltile, Marazzi)

Disclaimer: Waste allowances are estimates; complex rooms with many cuts, niches or angled walls need more.