Construction & Home ImprovementLast reviewed: November 2026

Brick Calculator

A brick calculator works out how many bricks, how much mortar and how many wall ties a wall needs. Enter the wall size, brick format and openings, and it counts modular, standard or queen bricks with 10% cutting waste, plus cap bricks for garden walls and a double-skin option for structural walls.

Key facts:
  • Modular bricks run 6.85 per sq ft; standard 6.55; queen 5.75.
  • A 20 by 3 ft garden wall needs 453 modular bricks plus 33 cap bricks.
  • One 80-lb bag of mortar lays about 110 bricks.
  • A standard pallet holds about 500 modular bricks.

Loading calculator…

Share or Export Current Results

Share Brick Calculator directly or copy link to clipboard

TwitterLinkedInFacebookWhatsApp

Calculation Formula & Mathematical Engine

Theoretical equation governing this computation.

Bricks = (Area_{wall} - Area_{openings}) \times Rate_{format} \times 1.10

Variable Definitions

BricksTotal brick count with 10% jobsite cutting waste
Rate_{format}Modular: 6.85 / sq ft; Standard: 6.55 / sq ft; Queen: 5.75 / sq ft

Step-by-Step Calculation Example

Estimating Brick for a 30ft × 9ft Residential Wall

Scenario: Cladding a wall with modular bricks, subtracting 45 sq ft of window openings.
Wall Size30 ft × 9 ft (270 sq ft gross)
Openings45 sq ft
FormatModular Brick (6.85 bricks/sq ft)
Execution Steps
  1. 1Net masonry area: 270 - 45 = 225 sq ft
  2. 2Net bricks: 225 × 6.85 = 1,541 bricks
  3. 3With 10% waste: 1,541 × 1.10 = 1,695 modular bricks
  4. 4Mortar: 1,695 ÷ 110 bricks per 80lb bag = 16 bags of Type N mortar
Final Verified Output:1,695 Modular Bricks + 16 Bags (80-lb) Type N Mortar + 85 Wall Ties

Comprehensive Practical Guide

In-depth analysis, domain guidelines, standard practices, and common pitfalls.

Mortar Types: When to Use Type N vs. Type S

Type N mortar (750 psi) is the standard for above-grade exterior residential brick veneer. Type S mortar (1,800 psi) is specified for below-grade, foundation, or high-wind load walls.

Single-Skin vs Double-Skin (Two-Wythe) Brick Walls

A single-skin wall is one brick thick (about 4 inches) and suits garden walls, planters and non-load-bearing partitions. A double-skin (two-wythe) wall is two bricks thick with a collar joint or cavity, and is used where the wall carries loads or needs the strength and weather resistance of a structural wall. Double-skin walls need roughly twice the bricks of a single-skin wall of the same size, plus wall ties between the wythes.

Cap and Coping Bricks: How Many Per Linear Foot?

Cap or coping bricks finish the top of a wall and shed rainwater. Allow about 1.5 cap bricks per linear foot (one standard brick is about 8 inches long plus a mortar joint), so a 20-ft garden wall needs 33 cap bricks (20 × 1.5, plus 10% waste). Lay them on edge or use purpose-made coping bricks for a wider, weather-shedding top.

Freestanding Garden Walls: Piers, Height Limits and Footings

Keep a single-skin freestanding garden wall to 3 ft high or less unless it is engineered: taller walls need piers every 6 to 8 ft, a double skin, or reinforcement. Use Type N mortar above grade and Type S below grade or in frost-prone footings, and set the wall on a concrete footing below the frost line — work out the concrete with the concrete footing calculator. Check local rules before building, as many areas require a permit above 3 to 4 ft.

Worked Example: Bricks for a 20 Ft × 3 Ft Garden Wall

A 20-ft long, 3-ft high garden wall is 60 sq ft with no openings. At the modular rate of 6.85 bricks per sq ft that is 60 × 6.85 = 411 bricks, plus 10% cutting waste = 453 modular bricks. Mortar is 453 ÷ 110 bricks per 80-lb bag = 4.1, so buy 5 bags of Type N. Finish the top with 20 × 1.5 = 30, plus 10% waste = 33 cap bricks, and add a pier every 6 to 8 ft if the wall runs longer than 20 ft.

Frequently Asked Questions About Brick Calculator

Direct, verified answers to common calculation and methodology questions.

A standard pallet holds approximately 500 modular bricks (weighing around 2,000 to 2,400 lbs).
Authoritative Sources & Data References:
  • Brick Industry Association (BIA Technical Notes 10 & 11)
  • Method: bricks = (wall area − openings) × format rate × 1.10 waste; mortar = bricks ÷ 110 per 80-lb bag.

Disclaimer: Ensure all masonry ties comply with IBC seismic tie standards.